Stainless Steel Sheet, Coil and Plate

»

Stainless Steel Sheet


Stainless Steel Sheet

Product Stocking and Processing Service Program

Stainless Steel Sheet
Grade 304, 304/304L, 316, 316/316L, 2205, 4003/AtlasCR12, 4003Ti/AtlasCRTi
Thickness (mm) 0.45 to <5.0
Width (mm) 914, 1219, 1500, 2000, Customer specific width
Length (mm) 1829, 2438, Customer specific length
Finish 2B, No.4, BA, No.1 (HRAP), Customer specific polish
Standard coating Paper interleaf, PE
Optional coating Laser, Deep drawing PVC
Plasma profiles To customer drawings

The information provided is for standard stock product and does not encapsulate all available combinations. Please contact the nearest Atlas Steels sales outlet if non standard product is required and we will enquire about its availability through our global supply network of mills and stockists.

For more technical information there are excellent reference manuals and data sheets contained within the technical library of this website.

Atlas Steels locations and contacts can be found in main menu of this website.

 

Stainless steel sheet, 0.45mm to less than 5.0mm - ASTM A240M
Atlas Steels has from years of experience determined the popular range of grades, widths and thicknesses of stock to be held inits bulk coil program at its processing service centre to meet customer demand. The standard range is as follows:

Grade Finish Thickness (mm) Width (mm) Length (mm)
304 2B,No. 4 PE 0.55 914, 1219 1828, 2438
304 2B, No. 4 PE 0.70 914, 1219 1828, 2438
304 2B, 2B PE, No. 4 PE, BA PE 0.90 914, 1219 1828, 2438
304 2B, 2B PE, No. 4 PE, BA PE 1.20 914, 1219, 1500 1828, 2438, 3000, 3048, 3658
304 2B, 2B PE, No. 4 PE 1.50 914, 1219, 1500 1828, 2438, 3000, 3048, 3658
304 2B, 2B PE, No. 4 PE 1.60 914, 1219, 1500 1828, 2438, 3000, 3048, 3658
304 2B, 2B PE, No. 4 PE 2.00 914, 1219, 1500 1828, 2438, 3000, 3048, 3658
304 2B, 2B PE, No. 4 PE 2.50 914, 1219, 1500 1828, 2438, 3000, 3048, 3658
304 2B, 2B PE, No. 4 PE 3.00 914, 1219, 1500 1828, 2438, 3000, 3048, 3658
304L 2B, 2B PE 4.00 1500, 2000 3000, 6000
316 2B 0.55 1219 2438
316 2B 0.70 1219 2438
316 2B 0.90 1219 2438
316 2B,No. 4 PE 1.20 1219 2438
316 2B,No. 4 PE 1.50 1219, 1500 2438, 3000, 3658
316 2B,No. 4 PE 1.60 1219, 1500 2438, 3000, 3658
316 2B,No. 4 PE 2.00 1219, 1500 2438, 3000, 3658
316 2B,No. 4 PE 2.50 1219, 1500 2438, 3000, 3658
316 2B,No. 4 PE 3.00 1219, 1500 2438, 3000, 3658
316L 2B, 2B PE 4.00 1500, 2000 3000, 6000
430 BA PE, No. 4 PE 0.70 914, 1219 1828, 2438
430 BA PE, No. 4 PE 0.90 914, 1219 1828, 2438
3CR12 2B 1.2 1250 2500
3CR12 2B 1.6 1250 2500
3CR12 2B 2.0 1250 2500
AtlasCR12Ti No. 1 3.0 1250, 1500 2500, 3000, 6000
3CR12 No. 1 4.0 1250, 1500 2500, 3000, 6000

 

Other grades and widths
Grades: 301L, 310, 321, 2205, 253MA.
Widths (mm): 600, 750, 900, 1050, 1200, 1524.
Product outside the standard range can be indented from overseas mills or stocked by special arrangement.
Up to 15000mm length is available through the Atlas processing facilities.

 

Fixed billing weights for flat rolled stainless steel

Thickness Austenitic nominal mass (kg/m²) Ferritic nominal mass (kg/m²)
0.45 3.68  
0.55 4.50  
0.70 5.72  
0.90 7.36  
1.20 9.81 9.61
1.50 12.3  
1.60 13.08 12.85
2.00 16.35 16.02
2.50 20.44 20.03
3.00 24.53 24.04
4.00 32.71 32.06

Austenitic stainless steel theoretical weight is based on 8177kg/m³
Ferritic stainless steel theoretical weight is based on 8000kg/m³

Actual weights may vary from the above due to specific grade and dimensional tolerances.

 

<< Previous Page