Carbon Steel Pipe, Tube and Fittings
Product Stocking and Processing Service Program
Carbon Pipe, Fittings and Flanges
|Carbon Pipe, Fittings and Flanges|
|Form||Welded (ERW) and Seamless|
|Size Range||DN15– DN600|
|Wall Thickness||Std Wt, XS|
|Fittings Type||Butt weld, Screwed & socket, Flanges, Black and Galvanised fittings to EN10241 (BS 1740)|
|Fittings Shape||Elbows, Tees, Reducers, Caps, Stub ends, Flanges (ANSI, Table E, D and H)|
Sizes outside the above range can be sourced from Atlas supply mills on an indent basis.
Carbon Steel Precision Tube
|Carbon Steel Precision Tube|
|Standard Shapes||Square, Round, Rectangle, Flat Sided Oval, Oval|
|Custom Shapes||Ag-beam, Roll cage|
|Steel Grades||Mild Steel: C250, C350, C500 (and variation of)
High Strength: SANC490
Galvanized: G250/Z275, G310/Z450, G450/Z450
|Sizes Range (mm)||Square 9.5 x 9.5 to 65 x 65
Round 9.5 to 101.6
Rectangular 25.4 x 12.7 to 76.2 x 19
Flat Sided Oval 25.4 x 16 to 54 x 19
Oval 19 x 12.7 and 31.8 x 17
|Wall Thickness (mm)||1.0 to 3.0|
Carbon Steel Heat Exchange and Hydraulic Tube
Heat Exchange and Condenser tube
ASTM A179M 'Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes' covers minimum wall thickness tube for heat transfer applications in sizes 3.18mm to 76.2mm OD.
Hydraulic and Pneumatic tube
The specification for heat exchanger tube is also used to specify seamless carbon steel tube intended for hydraulic applications. This hydraulic tubing is manufactured with average wall thickness specified; in all other respects the product conforms to the requirements of ASTM A179M and ASTM A450M.
In addition to the ASTM A179 tube stocked in heat exchanger and hydraulic variants, welded carbon steel tube can be obtained to either ASTM A178 or ASTM A214.
For detail of carbon steel pipe, tube and fittings products and the Atlas range please select the relevant product group of your interest from the dropdown shown in the "Carbon Steel Pipe, Tube and Fittings" menu bar.