Aluminium Sheet, Plate and Treadplate

»

Aluminium Sheet and Coil/Strip


Aluminium Sheet and Coil/Strip

Product Stocking and Processing Service Program

Aluminium Sheet and Coil/Strip
Alloy 1145, 5005, 5052/5251
Temper 0, H32, H34, H38
Thickness (mm) 0.5mm to 6.0mm for sheet and coil, 0.5 to 3.0 mm for strip
Width (mm) 900, 1200, 1500, 2000, Customer specific width (25mm minimum)
Length (mm) 1800, 2400, 3000, Customer specific length
Finish Mill, Customer specific linish
Coating PE Coating (not standard)
Plasma profile To customer drawings

The information provided is for standard stock product and does not encapsulate all available combinations. Please contact the nearest Atlas Steels sales outlet if non standard product is required and we will enquire about its availability through our global supply network of mills and stockists.

For further technical information on these products refer to the relevant section of the Atlas Product Reference Manual. There is other technical and product information contained within the Technical Library of this website.

Atlas Steels locations and contacts can be found in main menu of this website

 

Stock Range - Sheet
Atlas Steels stocks a comprehensive range of Aluminium sheet which is supported by a large coil stock program held at its processing service centre (Atlas Metal Processors). The range is as follows:

 

Aluminium Bend Radius
Displays the recommended minimum inside bending radii for 90 degree cold forming of sheet and plate. It covers most common alloys of aluminium and their temper range from thickness 0.4 mm to 12.0 mm.

 

.

<< Previous Page